Low Carbon Flat Ground Stock Info Doc

Low Carbon Flat Ground Stock offers substantial cost reduction. Furnished in 24" lengths there are savings of up to 60% compared to tool steel ground flat stock.

 

Ideal for stripper plates, jigs, fixtures, machine and componet parts, templates and a wide variety of parts that don't require more expensive heat treated steels.

 

Low Carbon Flat Ground Stock can be carburized or case hardened. After hardening, its physical properties are substantially higher, especially tensile strength, Brinell hardness and yield point.

 

Our sources for Low Carbon Flat Stock is unmatched in the industry.  24" lengths are available in many fractional sizes. Please contact our Metal Technicians and let us go to work for you on any of your flat stock needs.

Low Carbon Typical Analysis

  • Carbon-------------------------------------.15/.20

  • Silicon--------------------------------------.15/.20

  • Sulfur------------------------------------.050 Max

  • Phosphorous-------------------------.040 Max

  • Manganese-------------------------------.60/.90

                              Tolerances:

  • Thickness:-----------------------------------+/- .001"

  • Width:-----------------------------  -.000" to + .005"

  • Squareness Edge:-------------- .003" per inch

  • Squareness End:-----------------.004" per inch

1/16" Thick

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 8"

  • 10"

  • 12"

 

 

 

3/32" Thick

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 8"

  • 10"

  • 12"

1/8" Thick

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 8"

  • 10"

  • 12"

 

 

 

5/32" Thick

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 8"

  • 10"

  • 12"

3/16" Thick

  • 3/16"

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 8"

  • 10"

 

 

 

1/4" Thick

  • 1/4"

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 7"

  • 8"

  • 10"

  • 12"

5/16" Thick

  • 5/16"

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 7"

  • 8"

  • 10"

  • 12"

 

3/8" Thick

  • 3/8"

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 8"

  • 9"

  • 10"

  • 12"

1/2" Thick

  • 1/2"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 7"

  • 8"

  • 10"

  • 12"

 

 

5/8" Thick

  • 5/8"

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 7"

  • 8"

  • 10"

  • 12"

3/4" Thick

  • 3/4"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 7"

  • 8"

  • 9"

  • 10"

  • 12"

 

 

7/8" Thick

  • 7/8"

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 6"

1" Thick

  • 1"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 4-1/2"

  • 5"

  • 6"

  • 7"

  • 8"

  • 9"

  • 10"

  • 12"

 

 

1-1/8" Thick

  • 1-1/8"

  • 1-1/4"

  • 1-1/4"

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 4"

  • 5"

  • 6"

  • 8"

  • 10"

  • 12"

1-1/2" Thick

  • 1-1/2"

  • 2"

  • 2-1/2"

  • 3"

  • 3-1/2"

  • 4"

  • 5"

  • 6"

  • 8"

  • 10"

 

2" Thick

  • 2"

 

2-1/2" Thick

  • 2-1/2"

 
All Rights Reserved 2019
​Nolan's Mill & Metal, a Midway Company
​107 Twin Oaks Drive PO Box 134
Syracuse, NY 13206-0134
Request For Quote